|
|
Selected Methods of Improvement for the Driver's Orientation on the Roads
Černoch, Adam ; Valentová, Veronika (referee) ; Frič, Jindřich (advisor)
The aim of this thesis is to find suitable measures which will lead to the improvement of driver orientation in traffic spaceleading to lower the accident rate in the area. The theoretical part describes the traffic surveys that relate to the topic. Furthermore, the work mentioned detectors used for the implementation of automated traffic surveys. The theoretical part also describes methods that can be used to analyze the selected location and then design the ideal modification. At the end gives an overview of the various measures. In the practical part are different methodologies used for the analysis of selected intersections. Firstly, the analysis of observed conflict situations, including making conflicting diagram, under which was designed to measure. Then, the analysis of traffic accidents. Again, the result was a proposal for possible actions. The main objective was to compare and appreciation of both methodologies and proces design measures to improve driver orientation in the selected location.
|
|
|
Communication system for the blind - the mobile part
Dadák, Jiří ; Rampl, Ivan (referee) ; Herman, Ivo (advisor)
Orientation in big administration buildings can be very difficult for visually impaired people. Although most of the buildings are equipped with elevators, the buttons of which are designated with Braille characters and acoustic signals, it might be very difficult for the visually impaired to actually find the particular office. Even if there were descriptions in Braille at each office door, it would prove very complicating for the visually impaired individual to localize the descriptions in the first place, especially in case of a large number of offices in the building. That may also concern other important places, such as toilets, inside a building. In this thesis, I am going to present a design proposal of a communication system which uses transceivers placed at significant points in a building and receivers placed at the end of the white cane for orientation inside a building.
|
|
|
Student Housing
Golík, Pavel ; Todorov, Petr (referee) ; Pelčák, Petr (advisor)
The architectural study built block the northern corner of town in close proximity to the center of Brno. The main thrust of the solution is particularly easy throughput area, pedestrian safety and ease of orientation in space. The architectural study of student housing is the first step change in the given locality by regulatory plan. The intention was to broken and fragmented forms of buildings to bring the urban elements, the wide streets, passages, squares and courtyards, which will evaluate and develop the character and vitality of the place. Architectural building block concept takes into account noise pollution site and responds to a bad indication, due to the north. New built-in design and layouts are designed so as to reduce the noise levels of interior space and create a resting zone in courtyard.
|
|
|
Emotional Cartography
Rygálová, Monika ; Pfeiffer, Jan (referee) ; Sterec, Pavel (advisor)
The work aims to artistically compile perception of maps as a fact, what let us think about The world - how we know it from the map. I work with data, which I gain by displaying technology – eye tracking, which helps me to record track of moving eyes during watching any kind of picture. The observations will be people from different places such a place of stay etc. Gained data I am going to use as a study, which I will componate to maps and different vizualizations of world, countries etc. "Where i have not ever been before, it does not exist" – is idea of percepting world, wich I also work with on that project. Study will contain all aspect of perceiving maps and systematicly shown world related to the person, his memories to that place, fyzical contact and his impact in his scale person versus a the world.
|
|
|
9DOF sensor for weapon orientation measurement
Růžička, Jiří ; Richter, Miloslav (referee) ; Šedivá, Soňa (advisor)
This thesis deals with multi-axis position sensors, their nature and individual parts and types of these sensors. It is outlined their historical origin and the most used modern types, such as micro-electro-mechanical sensors. Further, the properties of these sensors, error sources and their compensation are discussed. Output data formats are also discussed here, such as Euler angles, their calculation and applications. The selected sensor is implemented in the simulator electronics, and the graphical application demonstrates its functions.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Vinklárková, Eliška ; Sedláček, Jan (referee) ; Foretník, Jan (advisor)
The main objective of the proposal was not to create a barrier for the inhabitants or tourists by integrating transport on this parcel, leaving it as far as possible to the pedestrians. Movement of pedestrians and vehicles should not cross. The new tracks are therefore moved to the existing siding. Bus traffic should take place at busy local roads. The terminal building is in the center of the plot and is a link between bus, train, car and pedestrians. Thanks to the selected transport solution, the parcel is free from the traffic barriers and there is a free pedestrian spread. At the same time, the transport solution does not allow the free passage of the population to the south. The location of the scatter surface naturally guides the visitor and the inhabitants of the city to their area of interest - a departure from the industrial part of the city.
|
|
| |
|
| |
|
|
The Effect of Temperature Annealing on Structure-Property Relationship of Oriented Polypropylene
Sadílek, Jiří ; Jančář, Josef (referee) ; Kohout,, Jan (referee) ; Hell,, Jaroslav (referee) ; Kučera, Jaroslav (advisor)
The aim of this work is to study the effect of thermal history to structure and properties not only of oriented polypropylene monofilaments with different orientation but of course of isotropic non-oriented polypropylene. Term thermal history includes thermal regimes from alpha relaxation temperature (T?) to melting temperature (Tm). This work consists of three parts. The changes of dynamic mechanical properties, strength, deformation and tensile modulus of polypropylene samples according to annealing temperature (Ta) are described in the first part of this work. In the second part, the changes of crystal phase are observed. Preferentially, calorimetric behaviour (DSC), changes of crystal dimensions and orientation function of crystal phase (X-ray) are observed. Measured values from the first and the second part of this work were used for calculation of total orientation function of PP samples. Rheological measurements are shown in the third part of this thesis. Rheological measurements consist of short isothermal creep, shrinkage of free tapes and static deformation at higher temperatures. Measured rheological values were performed using rheological models. Using these models characteristics of entropic spring, instantaneous elasticity and viscosity and tendency to get to state of ease were calculated.
|
|
|
Robot for Robotour 2010
Kubát, David ; Zbořil, František (referee) ; Rozman, Jaroslav (advisor)
The objective of this master's thesis was to get acquainted with an autonomous outdoor robot competition - The Robotour and further to study the capabilities and information about a robot designed on the DITS FIT Brno VUT. Next part of the project was to study various planning and localization algorithms and to make a proposal of a functional solution, allowing the robot to participate in the competition. To be specific, the goal of this work was to use the acquired knowledge for implementation of an antonomous software so the robot can start in the year 2010 race. The solution also included several related mechanical modifications. The final solution fulfills all the competiton rules and is capable of taking part in this year's plant.
|
guest ::
